Jersette 301
Maximum comfort for long-term work in aggressive environments
Liquidproof ProtectionGallery
Specific advantages
- Freedom of movement, due to the anatomical shape and excellent comfort from the seamless textile support
- Good tear-resistance
- Good resistance to many diluted acids and bases
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Care for the environment
- Recycled packaging, Optimised individual packaging to limit plastic waste
- Recycled material in the packaging: 30 %
Applications
Local Authorities (Cleaning)
- Handling household detergents
Aeronautics industry
- Work with composite materials (resins)
Construction Industry (Masons / Plasterers)
- Preparing and pouring mortar and cement
Standards
-
2131X
-
Type B
KPT
-
X1XXXX
Product detail
| Material | Natural latex |
|---|---|
| Colour | Blue |
| Interior finish | Textile support |
| Exterior finish | Pebbled |
| Length (cm) | 30-32 |
| Thickness (mm) | 1.15 |
| Size | 5 6 7 8 9 10 |
| Packaging | 1 pair/bag 5 pairs/bag 50 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,1,2-Tetrafluoroethane (HFC-134A) freon 134A 99% | 811-97-2 | 51 | 2 | ASTM F739 | NT |
|
| Acetone 99% | 67-64-1 | 9 | 0 | EN 374-3:2003 | NT |
|
| Diethylamine 98% | 109-89-7 | 3 | 0 | EN 374-3:2003 | 1 |
|
| Dimethylformamide 99% | 68-12-2 | 31 | 2 | ASTM F739 | 4 |
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | EN 16523-1:2015 | NT |
|
| Freon 114 99% | 76-14-2 | 78 | 3 | ASTM F739 | NT |
|
| Freon 124 99% | 2837-89-0 | 41 | 2 | ASTM F739 | NT |
|
| Freon 152A 99% | 75-37-6 | 9 | 0 | ASTM F739 | NT |
|
| Hydrogen chloride 99% | 7647-01-0 | 117 | 3 | ASTM F739 | NT |
|
| Hydrogen peroxide 30% | 7722-84-1 | 480 | 6 | EN 16523-1:2015 | NT |
|
| Methanol 85% | 67-56-1 | NT | NT | 4 |
|
|
| Methanol 99% | 67-56-1 | 21 | 1 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Styrene 99% | 100-42-5 | 9 | 0 | EN 374-3:2003 | NT |
|
| Sulfuric acid 10% | 7664-93-9 | NT | NT | 4 |
|
|
| Sulfuric acid 40% | 7664-93-9 | NT | NT | 4 |
|
|
| Sulfuric acid 50% | 7664-93-9 | NT | NT | 4 |
|
|
| Sulfuric acid 96% | 7664-93-9 | 30 | 1 | ASTM F739 | 2 |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 5 | 0 | EN 374-3:2003 | 1 |
|
| Toluene 99% | 108-88-3 | 5 | 0 | EN 374-3:2003 | NT |
|
| Vinyl Chloride 99% | 75-01-4 | 11 | 1 | ASTM F739 | NT |
|
*not normalized result
